- Heat Protection: up to 260c
- Max width: 135cm approximate.
- Base: White rubber non-slip. Highly effective.
- Face: White diamond design lightly embossed on the surface.
- Can be cut with scissors.
- This protector is folded as standard prior to dispatch.
- Please order tube dispatch is you would prefer to receive it without creasing.
- Cut to size note: We not guarantee millimetre cutting precision. While we do our best to get as close as possible, we do have a 3% sizing tolerance.
Oval Non Slip Protector
£0.00
Highly effective non slip backing & high heat resistance up to 260c.
If you need a different size. Select the next largest and request your custom size at the checkout in the notes field.
This product does not have the Bulgomme logo printed on the surface.
Out of stock
- Tube despatch is an optional extra to receive your fabric crease-free. It is not essential, as creases do drop out.
- The table protector is rolled then put inside a cardboard postal tube.
- Both ends of the tube are fitted with white plastic end caps, the end caps are secured using a combination of staples and sealing tape.
- The length and diameter of the tube varies depending on the product size.
- We are able to fit up-to 5 metres of table protector into one tube, so you can order multiple pieces and they can be fitted into one tube.
- The tube is then shipped to you with the shipping label stuck to the surface of the tube.
- When you receive the tube, open one end carefully and you will be able to keep and use the tube as a storage tube for your product.
- This product is wipe clean only, do not machine wash.
- Wipe with a damp cloth, use mild citrus based detergent if required.
- Some tomato, egg, curry based sauces and ink etc may cause staining.
- The longer stains are left on the surface, the harder it will be to remove them.
All tablecloths/protectors are cut to order so we are able to cut to any size you need at no additional cost.
If you want a more tailored size to the sizes available in the drop-down box, then you can request in the notes field at the checkout.
- How: Order the next size up to what you need.
- Where: At the checkout, you’ll see the notes field as shown below. Enter your size/s here rounded to the nearest cm. Eg: 121cm x 223cm
- Note: The widest sizes are already shown, we can not make tablecloths wider. Only longer.
Parasol Hole
- Parasol hole finished with nickel or brass coloured ring.
- You may also opt for no ring and just a plain cut hole which does not include any finish.
- The internal diameter of the ring is 40mm and 66mm depending on the size chosen.
- Please note there will be a metal ring on the underside of the table cover.
- Depending on the size of hole in your tabletop the underside of the ring may or may not come into contact with your table surface.
Brass Ring
Silver Ring
Tablecloth Shape
How much overhang should my tablecloth have?
We recommend that your tablecloth have an over hang between 15cm to 20cm all round. This means adding 30cm to 40cm to the length and width of your table size to get the required tablecloth size. We found this to be optimal overhang as it is long enough to drape over your table and not so long it touches your legs when sitting at the table. This is only our recommendation but you can choose what ever over hang you like.
Are the sizes shown for the table top size?
No. The sizes shown on our website is the tablecloth size you will receive. Please make sure you include your own overhang. The exception to this is when you are ordering a table protector – then we recommend to choose a size that will fit your table top.
Can you make wider tablecloths?
No. The widest widths we can produce in each design is already listed on the product page. We are restricted by the width of the rolls that come in to us. As a general guide here is the maximum we can produce in each fabric: Teflon/Acrylic fabrics: Up to 180cm (depending on design) Oilcloth: Up to 132cm (all designs) Vinyl PVC: Up to 140cm (all designs)
Optional extras
Tube Dispatch
Table Clips
Finished Edges
- No finish is the default finish for this fabric. It is just a cut edge. It does not fray.
- Edge binding finish adds a coloured bias around the edge of the tablecloth to improve the appearance. Bias bound rectangles and squares are automatically finished with rounded corners as standard.
- Round corners only can be added to rectangle and square tablecloths if you do not like straight cut corners.
Rounded Corners
How do I measure my table?
It’s really important that you get the measurements of your table and tablecloth overhang right as all of our fabrics are cut to order. For rectangles you need 2 measurements; the width and the length. For circles you need just the diameter of the table, which is from edge to edge making sure you go directly through the center of the table. Ovals require 2 measurements. Across the widest point of the table will give you the width, and the length can be taken down the longest part of the table. Measurements don’t have to be millimeter perfect, just rounded to nearest centimeter. For more in depth details visit our measuring guide page.