This extra thick (1.5mm /1500 micron), semi transparent PVC clear table protector provides good physical protection for your table top along with the benefits of being easy care, wipe clean.
The top surface is smooth, the underside has a fine embossed surface which prevents air bubbles from forming under the protector. This protector is particularly suited to glass and light coloured table tops compared to our clear extra thick protector.
Ideal for those who don’t want to hide the beauty of their table but want effective protection from knocks, scratches & heat damage. This product provides heat protection up to 80C and is suitable for contact with food.
Before considering making a purchase, please read and understand the product limitations with regard heat protection, suitable areas of use and product shrinkage – you can see detailed information here.
Outdoor use – we do not recommend this product for outdoor use.
The clear table protector will be supplied to you rolled inside a cardboard tube.
Need a custom size? Order the next size up and request it to be cut down in the notes field at the checkout. Note: widest width we can cut is 100cm
All clear protectors are cut to order so we are able to cut to any size you need at no additional cost.
If you want a more tailored size to the sizes available in the drop-down box, then you can request in the notes field at the checkout.
Please note we can not cut clear protectors into multiple pieces. If you require more than one piece, then please add separate clear protectors to your basket.
How: Order the next size up to what you need.
Where: At the checkout, you’ll see the notes field as shown below. Enter your size/s here rounded to the nearest cm. Eg: 121cm x 223cm
Note: The widest sizes are already shown, we can not make tablecloths wider. Only longer.
- Parasol hole finished with nickel or brass coloured ring.
- You may also opt for no ring and just a plain cut hole.
- The internal diameter of the ring is 40mm and 66mm depending on the size chosen.
- Please note there will be a metal ring on the underside of the table cover.
- Depending on the size of hole in your tabletop the underside of the ring may or may not come into contact with your table surface.
Brass Ring
Silver Ring
Tablecloth Shape
How much overhang should my tablecloth have?
We recommend that your tablecloth have an over hang between 15cm to 20cm all round. This means adding 30cm to 40cm to the length and width of your table size to get the required tablecloth size.
We found this to be optimal overhang as it is long enough to drape over your table and not so long it touches your legs when sitting at the table. This is only our recommendation but you can choose what ever over hang you like.
Are the sizes shown for the table top size?
No. The sizes shown on our website is the tablecloth size you will receive.
Please make sure you include your own overhang.
The exception to this is when you are ordering a table protector – then we recommend to choose a size that will fit your table top.
Can you make wider tablecloths?
No. The widest widths we can produce in each design is already listed on the product page.
We are restricted by the width of the rolls that come in to us.
As a general guide here is the maximum we can produce in each fabric:
Teflon/Acrylic fabrics: Up to 180cm (depending on design)
Oilcloth: Up to 132cm (all designs)
Vinyl PVC: Up to 140cm (all designs)
Optional extras
Tube Dispatch
Table Clips
Finished Edges
- No finish is the default finish for this fabric. It is just a cut edge. It does not fray.
- Edge binding finish adds a coloured bias around the edge of the tablecloth to improve the appearance. Bias bound rectangles and squares are automatically finished with rounded corners as standard.
- Round corners only can be added to rectangle and square tablecloths if you do not like straight cut corners.
Rounded Corners
How do I measure my table?
It’s really important that you get the measurements of your table and tablecloth overhang right as all of our fabrics are cut to order.
For rectangles you need 2 measurements; the width and the length.
For circles you need just the diameter of the table, which is from edge to edge making sure you go directly through the center of the table.
Ovals require 2 measurements. Across the widest point of the table will give you the width, and the length can be taken down the longest part of the table.
Measurements don’t have to be millimeter perfect, just rounded to nearest centimeter.
For more in depth details visit our measuring guide page.
You're viewing: Frosted Rose Table Protector – Extra ThickFree!
